Ithaca 1911 Serial Number Search

  1. USGI 1911's, 1911A1's, M45A1's...let's See Them ...
  2. Ithaca 1911 A1 Serial #1839500
  3. Cached

Sold For: $1,228.00

I have the opportunity the buy an old 1911 made by Ithaca. The slide is a great fit. It does not rattle like the ones I was around in the military, and the rifling looks good also. I don't have the serial number. I was wondering how much it could be worth before putting down money. By 1894, the company was under exclusive control of Leroy Smith and George Livermore. Many of the company's assets were purchased by Ithaca Acquisition Corporation in 1987 and moved to King Ferry, New York, where it operated until May, 1996. Now, dba, Ithaca Gun Company of Upper Sandusky, Ohio.

LSB#: 170224LR17

Search

Military Issued 1911 Serial Number Tables This John Browning patent gun, Model 1911, was so named for the year it was officially adopted for use by the United States Army. The Browning design was so great, that it has been changed little in over 100 years of production. ITHACA M 1911 U.S ARMY. Appears to have been re-finished. Serial number: 1863598. APPEARS TO HAVE BEEN RE-FINISHED, ACCORDING TO SERIAL# - 1944 PRODUCTION. Duplicate Serial Numbers: Colt manufactured 60,000 pistols in the Ithaca serial number range (804), 41,696 in the Remington Rand serial number range (900), and 4,171 in the US&S serial number range (10896). Ithaca and Remington Rands where not manufactured or shipped in numerical order.

Make: The frame was made by Remington Rand (falls in Remington Rand serial range.). The slide was made by Ithaca.

Model: 1911-A1

Serial Number: 1025385

Year of Manufacture: 1943 (Pg. 394 of Clawson’s “Colt .45 Service Pistols”)

Caliber: .45 A.C.P.

Action Type: Single Action Semi-Auto with Removable Magazine

Ithaca 1911 Serial Number SearchSmith

Markings: The left side of the slide is marked “ITHACA GUN COMPANY / ITHACA, N.Y.”. The left of the frame below the magazine release and the top of the slide in front of the rear sight are marked with a “P” acceptance proof. The left side of the frame above the magazine release is marked “FJA” (Frank J. Atwood Lt. Col., Sub-Inspector for Ithaca, Remington Rand and Union Switch 1942-1944). The right side of the frame is marked “UNITED STATES PROPERTY / NO. 1025385”, “M1911 A1 U.S. ARMY” and at the rear behind the grip with an Ordnance Wheel. The flat on the top of the frame in front of the hammer is marked “G” and the round part under the barrel is marked “T”, “T” and with an inspection mark. The left side of the barrel lug is marked “P” and the right side “HS”, indicating it was made by High Standard, who supplied barrels to Ithaca and Remington.

USGI 1911's, 1911A1's, M45A1's...let's See Them ...

Gun

Barrel Length: 5”

Sights / Optics: The front sight is a short blade with a mild ramp that has fine serrations fixed to the slide. The rear sight is a square notch dovetailed into the slide.

Stock Configuration & Condition: The grips are checkered reddish brown plastic. There is a light handling mark in the smooth bottoms of the left grip. The checkering shows very light wear with a mar in the front lower corner of the left grip. The grips rate in about Excellent overall condition.

Ithaca 1911 A1 Serial #1839500

Type of Finish: The pistol has a grey parkerized finish and the barrel has a black oxide (blued) finish. The mainspring housing is knurled. The front half of the slide is slightly darker than the back half, a result of the heat treating process on the slide.

Finish Originality: The finish is original with sharp, clear stampings on the frame and slide.

Bore Condition: The bore is bright and the rifling is sharp. There is no erosion in the bore.

Overall Condition: This pistol retains about 90-92% of its metal finish. There is thinning on the front edges of the slide and frame, the top edges of the slide and the edges of the trigger guard. There are several light handling marks scattered over the slide and frame, with a scratch through the finish on the left side of the trigger guard and a mark through the finish underneath the slide latch. The slide serrations are relatively sharp. The hammer knurling shows moderate wear, the recoil spring plug knurling shows light wear and the magazine release knurling is sharp. The knurling in the mainspring housing shows light wear. The grip screw heads are sharp and the markings are clear. Overall, this pistol rates in about Fine Plus condition.

Mechanics: The trigger pull is crisp. The slide is very tight to the frame. This pistol has manual and grip safeties, and this model does not have a magazine disconnect. The action functions correctly. We have not fired this pistol.

Ithaca 1911 Serial Number Search

Box, Paperwork & Accessories: This pistol comes with a single blued magazine. The magazine is unmarked and roughly finished, with deep scratches under the finish on the sides and floorplate. The magazine is in about Fine condition.

Cached

Our Assessment: > The 1911 and 1911-A1 pistols served the military of the United States from 1911 to 1985, through two World Wars and the Korean and Vietnam wars. They gained a reputation as a reliable handgun with plenty of stopping power, and are held in high regard by those who have used them. Early in WWII, Colt couldn’t produce enough pistols for the military, and in 1942, contracts were let to Remington Rand, Ithaca, and the Union Switch and Signal Company to produce pistols. Ithaca didn’t procure enough manufacturing equipment to meet their schedules, and early pistols produced in 1942 used WWI surplus Colt receivers, and in early 1943 used slides and receivers purchased from Colt. By July 1943, full production was finally achieved. This pistol is a hybrid with a Remington Rand frame and an Ithaca slide. The finish is original and we couldn’t find any arsenal rework marks to explain the Ithaca slide on the Remington frame. The barrel is a WWII barrel, made by High Standard, who made barrels for both Ithaca and Remington Rand. The pistol is in about Fine Plus condition with about 90-92% of its original finish remaining. The bore is bright with sharp rifling and no erosion. This pistol is basically a parts gun, but its nice finish should still garner a lot of interest from the collectors of WWI and WWII pistols, some of whom will be interested in buying the pistol just for the parts. This pistol is also a nice find for anyone interested in a top quality pistol. It is perfect for home protection, SASS Wild Bunch side matches and auto pistol matches at your local club.